Welcome to Flex Innovations!
Visit Us On FacebookVisit Us On InstagramVisit Us On YoutubeVisit Us On Twitter

Search…

New

RAVEN 180CC

$2,299.99$7,234.99

Please note, due to oversize sized shipment, the Raven is only available via freight LTL. Shipping is not included, Please select in-store pick-up during order and we will provide an estimate. Estimated shipping cost is approximately $350 to Eastern United States residential addresses and $500 to western residential addresses. All shipments are sent with FULL VALUE insurance and customer notification prior to delivery.




Current Availability as of 9.4.25: December ’25.

Clear

Save BIG on select items when purchased with a Raven 180!

-
+
$424.99
-
+
$2,524.99
-
+
$134.99
-
+
$214.99
-
+
$49.99
-
+
$224.99
-
+
$19.99
-
+
$124.99
-
+
$59.99
SKU: FPM25

Formulated and flown by Wayne Handley at airshows across the United States throughout the 1990s, the full-scale Raven is a one-of-a-kind aircraft that elevated the standard for aerobatic performance and ingenuity. Bringing this pioneering spirit to the giant scale RC arena, the Flex Innovations Raven 180 expands what is capable with a 40% class aircraft. Designed by Jase “The Ace” Dussia, the Raven showcases a distinguished scale appearance while containing cutting edge aerodynamics. The Raven 180 marks a new range of flight capabilities! Not only does it integrate the floaty low/slow 3D stability of a traditional 40% aircraft and crisp/consistent IMAC performance and presentation, but it offers the XA capabilities previously only seen in the 35% size making it an exceptional choice for a truly ‘Do It All’ airframe.

The Raven has been designed around the all-new Desert Aircraft 180cc twin cylinder engine, while being developed and tested for a wide range of engines of 150-200cc size in both twin and four-cylinder applications. Both twin cylinder and four-cylinder setups can be installed without any modifications required. Featuring the Flex Innovations Speed-Lock system all around, field assembly is a breeze. ARF assembly raises the bar for giant scale aircraft with pre-hinged and sealed control surfaces, pre-installed and painted control horns, installed cockpit/dash, and much more! The Raven 180 showcases a uniquely gorgeous livery designed by Clint Sweet of CS Designs.


FEATURES:

  • Designed by Jase “The Ace” Dussia
  • Flex Speed-Lock system for wings, stabs, and canopy
  • Motor box extension for twin cylinder applications allowing for zero modifications necessary
  • 3D and XA (eXtreme Aerobatic) performance with minimized control coupling while maintaining scale appearance
  • Aileron counter balances aid in roll authority and allow the aileron servos to be mounted closer to the fuselage to help minimize weight at the wingtip for cleaner rolls and snaps
  • Laminated carbon fiber, fiberglass, plywood and balsa structure keeps the model lightweight, yet incredibly strong.
  • Airfoiled tail surfaces provide enhanced flight performance and strength
  • Removeable Rudder for easy transport
  • Clear cowling template for exhaust openings
  • Two-piece fiberglass cowling for easy access to baffling and engine
  • Cockpit and dash pre-installed by the factory
  • Quick to assemble! All surfaces are hinged as well as gap sealed by the factory
  • Fiberglass baffling for twin-cylinder engines
  • Lightweight 50oz “soda bottle” style fuel tank included
  • Canister and pipe mounts included
  • Bottom fuselage hatch included for easy access
  • Landing gear utlizes blind nuts for easy installation
  • Painted Carbon fiber landing gear included in the box
  • Painted Fiberglass Wheel Pants and Cowling
  • Painted Fiberglass landing gear cuffs
  • Painted custom G10 Control Horns pre-installed by the factory
  • Wheel pant saver support wheel pants to greatly decrease chances of damage
  • Factory applied trim scheme

Aileron Speed Locks

Canopy Speed Locks

Horizontal Stab Speed Locks

Cowling Template

Canister / Tuned-pipe Access Hatch

Fiberglass Engine Baffles

Fiberglass Landing Gear Fairings

MPX Connector Ready Airframe

What Does an InstaFly Airplane Include?

All ARF FEATURES PLUS:

  • INCLUDED – Engine
  • INCLUDED – Personalized drilled carbon fiber spinner
  • INCLUDED – Personalized drilled Falcon Carbon Fiber Propeller
  • INCLUDED – Cowling drilled for your power setup
  • INCLUDED – Engine mounting hardware
  • INCLUDED – FTRC custom painted mufflers (gas setups only)
  • INSTALLED – Aura 12 Professional series fully programmed by FTRC
  • INSTALLED – Throttle & Control surface servos connected and sub-trimmed
  • INSTALLED – Fully wired airplane with FTRC custom Extension kit and wire loom
  • INSTALLED – Matching pilot and cockpit
  • INSTALLED – Fully Plumbed fuel system
  • INSTALLED – Custom baffles
  • INSTALLED – Receiver of your choice
  • INSTALLED – Dual 2S LiPo Receiver/Ignition packs
  • INSTALLED – Ignition IBEC
  • INSTALLED – FTRC Anodized Aluminum Hardware


Raven 180 Announcement and Overview

Raven 180 Flight Premiere

Raven 180 Joe Nall Noon Demo

Specifications:
Length: 110 in. (2794mm)
Wingspan : 113 in. (2870.2mm)
Weight: 37 lbs (16.78 kg) with DA-180 and stock mufflers
Engine: 150-222cc 2 or 4 Cylinder
Servos 400oz/in minimum 2-3 per aileron 1 per elevator 2 per rudder
Channels: 11+

Raven 180 Support:


Spare Parts
Spare Parts

Raven 180cc Manual
Raven 180cc Manual

Raven 180cc 120cc Wiki
Raven 180cc Wiki

Optional Aura Professional Support:


Aura Config Tool
Aura Config Tool

Aura Quick Start Overview
Aura Professional Quick-Start Overview

Aura 6-Axis Update and Quick Flip Guide
Aura 6-Axis Update and Quick Flip Guide

Support Wiki
Support Wiki

Aura Videos
Aura How To Videos

Raven 180cc Replacement Parts


Color

Raven 180cc Optional Parts and Accessories

 

Color

Reviews

There are no reviews yet.

Be the first to review “RAVEN 180CC”

You may also like…